MB - Remote Control V2

By this App, you can interact with your intruder alarm system of the Honeywell series MB-Secure and MB-Classic in combination with the transmission devices DS 6750, DS 6700 or DS 7700. In standalone mode, the transmission devices can also be used without a connected panel.

So you can control your alarm system time- and location-independent via WLAN or GPRS / UMTS.

This App enables you to remote control your system, as well as arming or disarming it. Pre-configured inputs and outputs can also be controlled directly and a change of its states can be seen life in the App.

Via user-definable buttons in the App and macros in the panel, even very complex actions can be triggered quick and easy. Additionally, panel states and inputs can be visualized by free configurable, simulated LED status indicators.

Due to the simple, user-friendly interface and the familiar keypad emulation, you will find it very easy to get along with this application.

Functionality:

- One App can manage any number of panels

- 4 user groups per system definable for a flexible assignment of access rights

- AES encrypted communication

- Many possibilities for panel control activities over macros, triggered by buttons on the Apps button page

- Free configurable LED and button page

- Configurable password protection at startup

- Improved user interface

- Significantly improved response time

Brief description of operation:

- At the beginning, the user group has to be selected and the associated key for the panel connection has to be entered

- Now a name and the connection address (IP address or URL) must be entered

- After connecting to the panel, the pages to be displayed and an initial page can be selected

- These settings must be done once per system, but are changeable at any time via the configuration menu

Requirements:

- Alarm panel MB-Secure and/or MB Classic equipped with DS 6750, DS 6700 (with V04.XX) or DS 7700 (with V06.XX)

- DS 6750, DS 6700 (V04.XX) or DS 7700 (V06.XX) as standalone device

- DS 6750/DS 6700/DS 7700 with Ethernet connection and access to WLAN or Internet

- Android-Version 2.1 or later on the smartphone / tablet

Dengan App ini, Anda dapat berinteraksi dengan sistem alarm penyusup Anda dari seri Honeywell MB-Secure dan MB-Classic dalam kombinasi dengan perangkat transmisi DS 6750, DS 6700 atau DS 7700. Dalam mode standalone, perangkat transmisi juga dapat digunakan tanpa sebuah panel yang terhubung.

Jadi Anda dapat mengontrol sistem alarm Anda waktu dan lokasi-independen melalui WLAN atau GPRS / UMTS.

App ini memungkinkan Anda untuk remote control sistem Anda, serta mempersenjatai atau melucuti itu. Input dan output pra-konfigurasi juga dapat dikontrol secara langsung dan perubahan negara dapat dilihat kehidupan di App.

Melalui tombol user-didefinisikan di App dan makro dalam panel, bahkan tindakan yang sangat kompleks dapat dipicu cepat dan mudah. Selain itu, negara-negara panel dan masukan dapat divisualisasikan oleh dikonfigurasi, simulasi indikator LED status bebas.

Karena sederhana, user-friendly interface dan keypad emulasi akrab, Anda akan merasa sangat mudah bergaul dengan aplikasi ini.

Fungsi:

- Satu App dapat mengatur sejumlah panel

- 4 kelompok pengguna per sistem didefinisikan untuk tugas fleksibel hak akses

- AES komunikasi terenkripsi

- Banyak kemungkinan untuk kegiatan panel kontrol atas macro, dipicu oleh tombol pada halaman tombol Apps

- LED dikonfigurasi gratis dan halaman tombol

- Proteksi password Dikonfigurasi saat startup

- User interface Peningkatan

- Secara signifikan meningkatkan waktu respon

Penjelasan singkat tentang operasi:

- Pada awalnya, kelompok pengguna harus dipilih dan kunci terkait untuk sambungan panel harus dimasukkan

- Sekarang nama dan alamat koneksi (alamat IP atau URL) harus dimasukkan

- Setelah tersambung ke panel, halaman yang akan ditampilkan dan halaman awal dapat dipilih

- Pengaturan ini harus dilakukan sekali per sistem, tetapi berubah setiap saat melalui menu konfigurasi

Persyaratan:

- Panel Alarm MB-Secure dan / atau MB klasik dilengkapi dengan DS 6750, DS 6700 (dengan V04.XX) atau DS 7700 (dengan V06.XX)

- DS 6750, DS 6700 (V04.XX) atau DS 7700 (V06.XX) sebagai perangkat mandiri

- DS 6750 / DS 6700 / DS 7700 dengan koneksi Ethernet dan akses ke WLAN atau Internet

- Android-Versi 2.1 atau yang lebih baru pada smartphone / tablet

By this App, you can interact with your intruder alarm system of the Honeywell series MB-Secure and MB-Classic in combination with the transmission devices DS 6750, DS 6700 or DS 7700. In standalone mode, the transmission devices can also be used without a connected panel.

So you can control your alarm system time- and location-independent via WLAN or GPRS / UMTS.

This App enables you to remote control your system, as well as arming or disarming it. Pre-configured inputs and outputs can also be controlled directly and a change of its states can be seen life in the App.

Via user-definable buttons in the App and macros in the panel, even very complex actions can be triggered quick and easy. Additionally, panel states and inputs can be visualized by free configurable, simulated LED status indicators.

Due to the simple, user-friendly interface and the familiar keypad emulation, you will find it very easy to get along with this application.

Functionality:

- One App can manage any number of panels

- 4 user groups per system definable for a flexible assignment of access rights

- AES encrypted communication

- Many possibilities for panel control activities over macros, triggered by buttons on the Apps button page

- Free configurable LED and button page

- Configurable password protection at startup

- Improved user interface

- Significantly improved response time

Brief description of operation:

- At the beginning, the user group has to be selected and the associated key for the panel connection has to be entered

- Now a name and the connection address (IP address or URL) must be entered

- After connecting to the panel, the pages to be displayed and an initial page can be selected

- These settings must be done once per system, but are changeable at any time via the configuration menu

Requirements:

- Alarm panel MB-Secure and/or MB Classic equipped with DS 6750, DS 6700 (with V04.XX) or DS 7700 (with V06.XX)

- DS 6750, DS 6700 (V04.XX) or DS 7700 (V06.XX) as standalone device

- DS 6750/DS 6700/DS 7700 with Ethernet connection and access to WLAN or Internet

- Android-Version 2.1 or later on the smartphone / tablet